Mouse Control in Altamonte Springs, FL

A mouse call almost always starts with a sound: scratching behind a cabinet, something moving inside a wall at night, or droppings turning up in a pantry. The first thing a technician does is confirm it really is a mouse and not a roof rat, since the treatment and the likely entry points are different for each.

House mice are small enough to pass through gaps about a quarter inch wide. In a Florida home that usually means a gap under a garage door, a torn weep screed at the base of the stucco, or a plumbing penetration under a sink or washing machine that was never sealed. We walk the exterior first, looking at these specific points before going inside.

Inside, we check the attic hatch, baseboards in the kitchen and laundry area, and any cabinet with plumbing running through it. Droppings, grease marks and gnawed packaging tell us where the activity is heaviest, and that is where traps go first.

Snap traps and enclosed bait stations are placed along the routes we find, not scattered through the house at random. Mice tend to travel the same paths repeatedly, hugging walls and cabinet edges, so traps placed off that path rarely catch anything.

• Traps placed along confirmed travel routes, not guessed locations.
• Bait stations used only where children and pets cannot reach them.
• A second visit to clear traps and check for new activity.

Once the mice inside are cleared, the entry points get sealed with steel wool, hardware cloth or sheet metal depending on the gap, materials mice cannot chew through the way they can chew drywall or soft foam. A torn weep screed gets a proper vent patch rather than a smear of caulk that a mouse can push through in a week.

Garage door gaps are the single most common entry point we find on Altamonte Springs homes, especially on older garages where the door sweep has worn down. Replacing or supplementing that sweep is often the single most effective fix on the whole job.

If activity continues after sealing, that usually means a second entry point was missed, not that the first fix failed. The follow-up visit is built around checking for exactly that.